Filter
Top Products
Model G0746/G0749 (Mfg. Since 3/13)
-9-
The information contained herein is deemed accurate as of 6/20/2013 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 3Model G0746
Main Specifications:
Operation Info
Swing Over Bed......................................................................................................................................... 20 in.
Distance Between Centers........................................................................................................................ 60 in.
Max Weight Between Centers............................................................................................................. 1300 lbs.
Swing Over Cross Slide............................................................................................................................. 13 in.
Swing Over Saddle.................................................................................................................................... 13 in.
Swing Over Gap........................................................................................................................................ 25 in.
Maximum Tool Bit Size................................................................................................................................ 1 in.
Compound Travel........................................................................................................................................ 5 in.
Carriage Travel.......................................................................................................................................... 60 in.
Cross Slide Travel..................................................................................................................................... 13 in.
Headstock Info
Spindle Bore........................................................................................................................................... 3.15 in.
Spindle Taper............................................................................................................................................ MT#7
Number of Spindle Speeds............................................................................................................................. 15
Spindle Speeds......................................................................................................................... 24 – 1600 RPM
Spindle Type................................................................................................................................ D1-8 Camlock
Spindle Bearings........................................................................................................................ Tapered Roller
Spindle Length..................................................................................................................................... 28-1/8 in.
Spindle Length with 3-Jaw Chuck.............................................................................................................. 33 in.
Spindle Length with 4-Jaw Chuck....................................................................................................... 32-7/8 in.
Spindle Length with Faceplate............................................................................................................ 29-7/8 in.
Tailstock Info
Tailstock Quill Travel............................................................................................................................. 4-3/4 in.
Tailstock Taper.......................................................................................................................................... MT#5
Tailstock Barrel Diameter......................................................................................................................... 2.6 in.
Threading Info
Number of Longitudinal Feeds....................................................................................................................... 66
Range of Longitudinal Feeds........................................................................................ 0.0027 – 0.1500 in./rev.
Number of Cross Feeds................................................................................................................................. 66
Range of Cross Feeds................................................................................................... 0.0013 – 0.0750 in./rev
Number of Inch Threads................................................................................................................................. 66
Range of Inch Threads...................................................................................................................... 1 – 56 TPI
Number of Metric Threads.............................................................................................................................. 66
Range of Metric Threads................................................................................................................ 0.5 – 28 mm
Number of Modular Pitches............................................................................................................................ 33
Range of Modular Pitches.............................................................................................................. 0.5 – 3.5 MP
Number of Diametral Pitches.......................................................................................................................... 33
Range of Diametral Pitches................................................................................................................ 8 – 56 DP
Dimensions
Bed Width.................................................................................................................................................. 13 in.
Leadscrew Diameter.............................................................................................................................. 1-3/8 in.
Leadscrew TPI........................................................................................................................................... 4 TPI
Leadscrew Length............................................................................................................................... 79-1/2 in.
Steady Rest Capacity............................................................................................................................ 6-1/4 in.
Follow Rest Capacity......................................................................................................................... 3-15/16 in.
Faceplate Size........................................................................................................................................... 17 in.
Feed Rod Diameter.............................................................................................................................. 13/16 in.
Floor to Center Height......................................................................................................................... 45-1/4 in.
Height With Leveling Jacks........................................................................................................................ 63 in.