Filter
Top Products
Model G0775 (Mfd. Since 11/14)
-23-
SECTION 6: MAINTENANCE
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check
• Loose mounting bolts.
• Damaged or worn sandpaper.
• Worn or damaged wires.
• Any other unsafe condition.
Weekly/Monthly Check
• Vacuum dust off motor fan.
Schedule
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Cleaning the Model G0775 is relatively easy.
Vacuum excess wood chips and sawdust, and
wipe off the remaining dust with a dry cloth. If any
resin has built up, use a resin dissolving cleaner
to remove it.
Protect the unpainted cast iron table by wiping
it clean after every use—this ensures moisture
from wood dust does not remain on bare metal
surfaces. Keep the table rust-free with regular
applications of products like G96
®
Gun Treatment,
SLIPIT
®
, or Boeshield
®
T-9.
Cleaning &
Protecting
G5562—SLIPIT
®
1 Qt. Gel
G5563—SLIPIT
®
12 Oz. Spray
G2871—Boeshield
®
T-9 12 Oz. Spray
G2870—Boeshield
®
T-9 4 Oz. Spray
H3788—G96
®
Gun Treatment 12 Oz. Spray
H3789—G96
®
Gun Treatment 4.5 Oz. Spray
Figure 23. Recommended products for protect-
ing unpainted cast iron/steel part on machinery.