Filter
Top Products
-28-
Model G0779 (Mfd. Since 09/14)
Figure 30. Model G3658 115-Pc. Drill Bit Set.
G3658—Tin-Coated 115-Pc. Drill Bit Set
Titanium nitride-coated bits last up to six times as
long as uncoated bits. This 115-piece set features
29 fractional bits, from
1
⁄6" to
1
⁄2" in increments
of
1
⁄64", letter bits from A–Z, and 60 number bits.
Housed in a rugged steel case.
T23962—ISO 68 Moly-D Way Oil, 5 gal.
T23963—ISO 32 Moly-D Machine Oil, 5 gal.
T26685—ISO 32 Moly-D Machine Oil, 1 gal.
Moly-D oils are some of the best we've found for
maintaining the critical components of machinery
because they tend to resist run-off and maintain
their lubricity under a variety of conditions—as
well as reduce chatter or slip. Buy in bulk and
save with 5-gallon quantities.
Figure 31. ISO 68 and ISO 32 machine oil.
T23962 T23963 T26685
H8140—7 Gal. Coolant Tank System
Add this complete 7 Gallon Coolant Tank System
to any metal cutting machine for efficient cutting,
reduced tool wear and better finishes. Includes
pump, switch, enclosed tank, coolant return hose
and flexible nozzle with magnetic base. Made in
an ISO 9001 factory. Pump motor
1
⁄16 HP, 110V;
maximum flow 3.17 gallons per minute; maximum
capacity 7 gallons.
Figure 28. Model H8140 7-Gallon Coolant Tank
System.
G1064—Cross-Sliding Vise
This vise features an exclusive slide bar to prevent
the jaws from tilting up or sideways when tighten-
ing. Adjustable gibs take up any slack on both top
and bottom slides. Use this vise on your drill press
for cutting keyways and doing light milling jobs.
Figure 29. Model G1064 Cross-Sliding Vise.