Grizzly G0779 Drill User Manual


  Open as PDF
of 52
 
-46-
Model G0779 (Mfd. Since 09/14)
Labels
G0779
(12/05/14)
G0779 Machine Labels A
• Label is actual size
• Label must be made of
oil-resistant material
WARNING
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
PANTONE 151 C or RAL 2005
COLOR CODES
NOTICE
PANTONE 3005 C or RAL 5005
GRIZZLY GREEN
PANTONE 568C
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
340 x 190 mm
L2
L1
210 RPM
90 RPM
Change spindle
speed or rotation
direction ONLY
when spindle is
completely
stopped.
5
4
3
2
1
0
NOTICE
Do not exceed gearbox oil level
above red dot in center of oil
site glass below.
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVELS BEFORE USING!
DANGER
PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
COLOR CODES
NOTICE
PANTONE 3005 C or RAL 5005
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at manuals@grizzly.com
17 x 19mm
54 x 54mm
34.5 x 80mm
402
G0779 Machine Labels B
(12/05/14)
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
chemical-resistant material
NOTICE
Do not exceed gearbox oil level
above red dot in center of oil
site glass below.
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVELS BEFORE USING!
Motor: 2 HP, 220V, Single-Phase, 60 Hz, 8.6A
Motor Speed: 1720 RPM
Swing: 23-3/8"
Distance Spindle to Column: 11-11/16"
Distance Spindle to Table: 26-1/2"
Spindle Taper: R-8
Spindle Travel: 5"
Number of Spindle Speeds: 6
Spindle Speed Range: 90 – 1970 RPM
Vertical Table Travel: 24-3/8"
Table Swivel Around Column: 360˚
Drilling Capacity Mild Steel: 1-1/4"
Gearhead Fluid Capacity: 4-3/4 qt.
(Grizzly #T23963 or ISO 32 Equivalent)
Weight: 706 lbs.
Specifications
MODEL G0779
HEAVY-DUTY 23
" GEARHEAD
DRILL PRESS
Date
S/N
Mfd. for Grizzly in China
DANGER
PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
COLOR CODES
NOTICE
PANTONE 3005 C or RAL 5005
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
To reduce the risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up or servicing.
5. Avoid entanglement with spindle—tie back long hair, roll up long sleeves,
and DO NOT wear loose clothing, gloves, or jewelry.
6. Properly set up machine before starting.
7. Keep all guards and covers in place during operation.
8. Clamp workpiece to table to prevent rotation.
9. Avoid positioning hands where they could slip into rotating bits.
10. Always remove chuck keys and other tools before starting.
11. Never attempt to slow or stop spindle with hands or tools.
12. Use correct speeds for drilling accessories and workpiece.
13. Do not operate when tired or under influence of drugs or alcohol.
14. Do not expose to rain or use in wet locations.
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
106 x 175.5mm
17 x 19mm
54 x 54mm
34.5 x 80mm
403
404
G0779 Machine Labels B
(12/05/14)
NOTICE
Do not exceed gearbox oil level
above red dot in center of oil
site glass below.
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVELS BEFORE USING!
Motor: 2 HP, 220V, Single-Phase, 60 Hz, 8.6A
Motor Speed: 1720 RPM
Swing: 23-3/8"
Distance Spindle to Column: 11-11/16"
Distance Spindle to Table: 26-1/2"
Spindle Taper: R-8
Spindle Travel: 5"
Number of Spindle Speeds: 6
Spindle Speed Range: 90 – 1970 RPM
Vertical Table Travel: 24-3/8"
Table Swivel Around Column: 360˚
Drilling Capacity Mild Steel: 1-1/4"
Gearhead Fluid Capacity: 4-3/4 qt.
(Grizzly #T23963 or ISO 32 Equivalent)
Weight: 706 lbs.
Specifications
MODEL G0779
HEAVY-DUTY 23
DRILL PRESS
Date
S/N
Mfd. for Grizzly in China
GRIZZLY LOGO RED
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at
To reduce the risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up or servicing.
5. Avoid entanglement with spindle—tie back long hair, roll up long sleeves,
and DO NOT wear loose clothing, gloves, or jewelry.
6. Properly set up machine before starting.
7. Keep all guards and covers in place during operation.
8. Clamp workpiece to table to prevent rotation.
9. Avoid positioning hands where they could slip into rotating bits.
10. Always remove chuck keys and other tools before starting.
11. Never attempt to slow or stop spindle with hands or tools.
12. Use correct speeds for drilling accessories and workpiece.
13. Do not operate when tired or under influence of drugs or alcohol.
14. Do not expose to rain or use in wet locations.
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
17 x 19mm
54 x 54mm
34.5 x 80mm
405
H3
H2
H1
L3
1970 RPM
1180 RPM
670 RPM
345 RPM
13
12
11
10
9
8
7
6
5
4
3
2
1
0
cm in
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
WARNING!
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
Always wear
ANSI-approved safety
glasses and face shield
when using this
machine.
EYE/FACE INJURY
HAZARD!
407
406
NOTICE
Do not exceed gearbox oil level
above red dot in center of oil
site glass below.
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVELS BEFORE USING!
DANGER
PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
COLOR CODES
NOTICE
PANTONE 3005 C or RAL 5005
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
17 x 19mm
54 x 54mm
34.5 x 80mm
401
REF PART # DESCRIPTION REF PART # DESCRIPTION
401 P0779401 ELECTRICITY LABEL 405 P0779405 CHECK OIL LABEL
402 P0779402 GEARBOX OIL LEVEL NOTICE 406 P0779406 GRIZZLY GREEN TOUCH-UP PAINT
403 P0779403 MACHINE ID LABEL 407 P0779407 CONTROLS/WARNING LABEL
404 P0779404 GRIZZLY BEIGE TOUCH-UP PAINT
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
 previous next