Filter
Top Products
Model G0779 (Mfd. Since 09/14)
-5-
Machine Data Sheet
The information contained herein is deemed accurate as of 5/10/2015 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 1 OF 2Model G0779
MACHINE DATA
SHEET
Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
MODEL G0779 HEAVY-DUTY FLOOR MODEL GEARHEAD
DRILL PRESS
Product Dimensions:
Weight.............................................................................................................................................................. 706 lbs.
Width (side-to-side) x Depth (front-to-back) x Height........................................................................... 25 x 33 x 80 in.
Footprint (Length x Width)............................................................................................................................26 x 18 in.
Shipping Dimensions:
Type.......................................................................................................................................................... Wood Crate
Content........................................................................................................................................................... Machine
Weight.............................................................................................................................................................. 786 lbs.
Length x Width x Height....................................................................................................................... 29 x 30 x 72 in.
Electrical:
Power Requirement............................................................................................................ 220V, Single-Phase, 60Hz
Full-Load Current Rating....................................................................................................................................... 8.6A
Minimum Circuit Size..............................................................................................................................................15A
Connection Type....................................................................................................................................... Cord & Plug
Power Cord Included.............................................................................................................................................. Yes
Power Cord Length.......................................................................................................................................... 6-1/2 ft.
Power Cord Gauge......................................................................................................................................... 14 AWG
Plug Included.......................................................................................................................................................... Yes
Included Plug Type................................................................................................................................................ 6-15
Switch Type.......................................................................................................................................Forward/Reverse
Motors:
Main
Type................................................................................................................. TEFC Capacitor-Start Induction
Horsepower................................................................................................................................................ 2 HP
Phase............................................................................................................................................ Single-Phase
Amps........................................................................................................................................................... 8.6A
Speed................................................................................................................................................ 1720 RPM
Power Transfer ................................................................................................................................. Gear Drive
Bearings..................................................................................................... Shielded & Permanently Lubricated
Main Specifications:
Operation Information
Swing................................................................................................................................................... 23-3/8 in.
Drilling Capacity (Mild Steel)................................................................................................................. 1-1/4 in.
Number of Spindle Speeds............................................................................................................................... 6
Range of Spindle Speeds.......................................................................................................... 90 – 1970 RPM
Drill Chuck Type........................................................................................................................................... B16
Drill Chuck Size................................................................................................................................. 1 – 13 mm
Head Information
Max Head Tilt (Left/Right)....................................................................................................................... 90 deg.
Maximum Movement of Head Casting................................................................................................ 10-1/2 in.
Head Swivel.......................................................................................................................................... 360 deg.