Filter
Top Products
Model G7943/G7944 (Mfg. 10/02+)
-7-
The information contained herein is deemed accurate as of 12/8/2014 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 3Model G7944
Other Related Information
Base Length...............................................................................................................................................18 in.
Base Width................................................................................................................................................ 11 in.
Quill Diameter....................................................................................................................................... 2.040 in.
Depth Stop Type.......................................................................................................................................... Hub
Column Diameter.................................................................................................................................. 3.150 in.
Mobile Base........................................................................................................................................... D2260A
Has Work Light............................................................................................................................................. Yes
Light Socket Type....................................................................................................................... 110V, Std Bulb
Maximum Bulb Wattage............................................................................................................................. 60 W
Spindle Information
Spindle Taper............................................................................................................................................ MT#2
Spindle Travel........................................................................................................................................3-1/4 in.
Distance From Spindle To Column.............................................................................................................. 7 in.
Distance From Spindle To Table......................................................................................................... 31-1/2 in.
Distance From Spindle To Base................................................................................................................ 49 in.
Table Information
Table Length........................................................................................................................................11-3/8 in.
Table Width......................................................................................................................................... 11-3/8 in.
Table Thickness.................................................................................................................................... 1-1/4 in.
Floor To Table Height........................................................................................................................ 20 – 46 in.
Vertical Table Movement............................................................................................. Crank Handle Operation
Table Swing.......................................................................................................................................... 360 deg.
Max Table Tilt (Left/Right)...................................................................................................................... 90 deg.
Table Swivel Around Center................................................................................................................. 360 deg.
Table Swivel Around Column............................................................................................................... 360 deg.
Maximum Movement Of Work Table......................................................................................................... 14 in.
Number of T Slots.............................................................................................................................................4
T Slot Width.............................................................................................................................................. 5/8 in.
T Slot Length......................................................................................................................................... 3-7/8 in.
Operation Information
Type........................................................................................................................................................... Floor
Swing......................................................................................................................................................... 14 in.
Drilling Capacity (Mild Steel)........................................................................................................ 3/4 in. in Steel
Number of Spindle Speeds.............................................................................................................................12
Range of Spindle Speeds........................................................................................................ 140 – 3050 RPM
Drill Chuck Type....................................................................................................................... JT33 Key Chuck
Drill Chuck Size............................................................................................................................. 1/64 – 5/8 in.
Other Specifications:
Country of Origin ................................................................................................................................................ China
Warranty ........................................................................................................................................................... 1 Year
Approximate Assembly & Setup Time ........................................................................................................45 Minutes
Serial Number Location ................................................................................................................... ID Label on Head
ISO 9001 Factory .................................................................................................................................................. Yes
CSA, ETL, or UL Certified/Listed ............................................................................................................................ No
Awards .............. Popular Woodworking Editor's Choice Tool Buying Guide, American Woodworker Best Buy 2001,
Woodworker's Journal Tools That Endure