Filter
Top Products
Model G7943/G7944 (Mfg. 10/02+)
-33-
Figure 42. Model H8071 Lathe Attachment.
H8071—Lathe Attachment for Drill Press
Perform vertical spindle turning on your multi-
speed drill press with this Lathe Attachment. Easy
setup means quick change over from drill press
mode to lathe mode. A 12" tool rest allows a
maximum work piece length of 24" when the work
piece is reversed. Includes a base plate with live
center, 12" tool rest, mounting bolts, mini screw
center and spur center. Fits all drill presses with a
through hole in the table.
H7827—Drill Press Table
Add this 23
3
⁄4" wide x 11
7
⁄8" deep Drill Press Table
with 3" high fence and stop block to your drill
press for greater work support and increased
accuracy. The fence and stop block slide along
T-slots for quick, yet secure set-up and a remov-
able 3
15
⁄16" square center block allows thru drilling
past the table. Fits all standard drill press tables
and includes two universal table clamps. Mortising
chisel and clamps not included.
Figure 44. Model H7827 Drill Press Table.
G1083—Mortising Attachment
A mortising attachment and chisel lets you drill
square holes in wood. The attachment holds the
sharp cornered chisel in place while the inner drill
cuts out the center. Drills have
1
⁄2" shank.
Figure 45. Model G1083 Mortising Attachment.
H6238—Drill Press Roller Supports
This Drill Press Roller Support provides stability
and control for longer work. Rollers clamp to the
column and measure 9
1
⁄2" wide x 1
3
⁄8" diameter.
Lateral adjustment range is 8" minimum to 24"
maximum on each side and vertical adjustment
is 8".
Figure 43. Model H6238 Roller Supports.