Filter
Top Products
-2- G1847 / G1852 / G 1861 / G3811 Air Nailers/Staplers
For Your Own Safety Read Instruction
Manual Before Operating Nailer
Safety Instructions For Power Tools
These safety rules cannot cover every situation in a work shop. Consider your conditions when setting
up or operating your nailer.
SECTION 1: SAFETY
DO NOT CONNECT nailer to the air hose until
you are in position and ready to operate the
nailer safely.
KEEP HANDS and other body parts away from
the nailer tip at all times.
NEVER MANUALLY DEPRESS the safety
nose and shoot fasteners for any reason.
DO NOT REST a pressurized nailer against
your body for any reason.
8. USE RIGHT TOOL. Don’t force tool or
attachment to do a job for which it was not
designed.
9. WEAR PROPER APPAREL Do not wear
loose clothing, gloves, neckties, rings,
bracelets, or other jewelry which may get
caught in moving parts. Non-slip footwear is
recommended. Wear protective hair cover-
ing to contain long hair.
10. ALWAYS USE SAFETY GLASSES. Also
use face or dust mask if tool operation is
dusty. Everyday eyeglasses only have
impact resistant lenses, they are NOT safety
glasses.
11. SECURE WORK. Use clamps or a vise to
hold work when practical. It’s safer than
using your hand and frees both hands to
operate tool.
12. DON’T OVERREACH. Keep proper footing
and balance at all times.
1. KEEP GUARDS IN PLACE and in working
order.
2. REMOVE ADJUSTING KEYS AND
WRENCHES. Form habit of checking to see
that keys and adjusting wrenches are
removed from tool before turning on.
3. KEEP WORK AREA CLEAN. Cluttered
areas and benches invite accidents.
4. DON’T USE IN DANGEROUS ENVIRON-
MENT. Don’t use power tools in damp or
wet locations, or expose them to rain. Keep
work area well lighted.
5. KEEP CHILDREN AND VISITORS AWAY.
All children and visitors should be kept a
safe distance from work area.
6. MAKE WORK SHOP CHILD PROOF with
padlocks, master switches, or by removing
starter keys.
7. DON’T FORCE TOOL. It will do the job bet-
ter and safer at the rate for which it was
designed.