Filter
Top Products
G4227 Sliding Table -17-
The following pages contain a parts diagram, parts
list and Warranty/Return information for your
Model G4227 Sliding Table.
If you need parts or help in assembling your slid-
ing table, or if you need operational information,
we encourage you to call our Service
Department. Our trained service technicians will
be glad to help you.
If you have comments dealing specifically with
this manual, please write to our Bellingham,
Washington location using the address in
Section 3: Introduction. The specifications,
drawings, and photographs illustrated in this
manual represent the Model G4227 as supplied
when the manual was prepared. However, due to
Grizzly’s policy of continuous improvement,
changes may be made at any time with no oblig-
ation on the part of Grizzly. Whenever possible,
though, we send manual updates to all owners of
a particular tool or machine. Should you receive
one, add the new information to this manual and
keep it for reference.
We have included some important safety mea-
sures that are essential to this machine’s opera-
tion. While most safety measures are generally
universal, Grizzly reminds you that each work-
shop is different and safety rules should be con-
sidered as they apply to your specific situation.
We recommend you keep a copy of our current
catalog for complete information regarding
Grizzly's warranty and return policy. If you need
additional technical information relating to this
machine, or if you need general assistance or
replacement parts, please contact the appropri-
ate regional Service Department listed in the
Section 3: Introduction.
Additional information sources are necessary to
realize the full potential of this sliding table. Trade
journals, woodworking magazines, and the
shelves of your local library are good places to
start. Knowledge and caution are vital compo-
nents of successful operation.
As with all table saws and shapers, there is
the potential for danger when using the
Model G4227 Sliding Table. Use the table saw
or shaper with respect and caution to lessen
the possibility of operator injury or mechani-
cal damage. If normal safety precautions are
overlooked or ignored, serious injury to the
operator or others in the area is possible.
SECTION 6: CLOSURE
The Model G4227 was specifically designed
for use with table saws and shapers. DO
NOT MODIFY AND/OR USE THIS ACCESSO-
RY FOR ANY OTHER PURPOSE.
Modifications or improper use of this unit
will void the warranty. If you are confused
about any aspect of this accessory, DO NOT
use it until all your questions have been
answered. Serious personal injury may
occur.
Commentary
Operating this equipment has the potential
for flying debris to cause eye injury. Always
wear safety glasses or goggles when oper-
ating equipment. Everyday glasses or read-
ing glasses only have impact resistant lens-
es, they are not safety glasses. Be certain
the safety glasses you wear meet the appro-
priate standards of the American National
Standards Institute (ANSI).