Filter
Top Products
G4227 Sliding Table -5-
Clean up
The sliding table surface is coated with a plastic
film that protects it from damage during shipment.
Heat the film with a hair dryer and remove the
protective film with great care to avoid peeling the
laminate off.
The Model G4227 is shipped from the manufac-
turer in a carefully packed carton. If you discover
the sliding table is damaged after you’ve signed
for delivery, please call Customer Service imme-
diately for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise filing a freight claim can be difficult.
Unpacking
The sliding table repre-
sents a heavy load at 75
pounds. Seek assistance
before beginning assem-
bly.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
To operate this sliding table on a tablesaw
or shaper safely and efficiently, it is essen-
tial to become as familiar with the charac-
teristics of both as much as possible. The
time you invest before you begin to use
your Model G4227 will be time well spent.
DO NOT operate the machine until you are
completely familiar with the contents of
this manual. Make sure you read and
understand all of the safety procedures. If
you do not understand something, DO NOT
operate the machine.
Read the manual before
assembly and opera-
tion. Become familiar
with the accessory and
it’s operation before
beginning any work.
Serious personal injury
may result if safety or
operational information
is not understood or fol-
lowed.
Most importantly, we stand behind our products.
If you have any service questions or parts
requests, please call, write or email us at the
locations listed below.
Grizzly Industrial, Inc.
2406 Reach Road
Williamsport, PA 17701
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http:⁄⁄www.grizzly.com
The specifications, drawings, and photographs
illustrated in this manual represent the Model
G4227 as supplied when the manual was pre-
pared.
However, owing to Grizzly’s policy of continuous
improvement, changes may be made at any time
with no obligation on the part of Grizzly.
Whenever possible, though, we send manual
updates to all owners of a particular tool or
machine. Should you receive one, we urge you to
insert the new information with the old and keep
it for reference.