Filter
Top Products
-10-
Model T25688 (Mfg. Since 09/13)
Bench Mounting
Figure 6. Example of a "Direct Mount" setup.
Machine Base
Workbench
Lag Screw
Flat Washer
Another option is a "Direct Mount" (see example
below) where the machine is secured directly to
the workbench with lag screws and washers.
The base of this machine has mounting holes
that allow it to be fastened to a workbench or
other mounting surface to prevent it from moving
during operation and causing accidental injury or
damage.
The strongest mounting option is a "Through
Mount" (see example below) where holes are
drilled all the way through the workbench—and
hex bolts, washers, and hex nuts are used to
secure the machine in place.
Machine Base
Workbench
Hex
Bolt
Flat Washer
Flat Washer
Lock Washer
Hex Nut
Figure 5. Example of a "Through Mount" setup.
Assembly
The Model T25688 comes from the factory almost
fully assembled. All that is required for assem-
bly is attaching the crank handle to the handle.
Thread the crank handle into the small end of the
crank and tighten, as shown in Figure 7.
Figure 7. Assembly.