Filter
Top Products
-20-
Model T25688 (Mfg. Since 09/13)
SECTION 5 : MAINTENANCE
Cleaning
LubricationSchedule
For optimum performance from the machine, fol-
low this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check:
• Loose mounting bolts.
• Any other unsafe condition.
Weekly Maintenance:
• Clean machine.
• Lubricate gears.
• Lubricate roller bushings.
Cleaning the Model T25688 is relatively easy.
Periodically wipe down the rollers to remove dust
and debris—this ensures rust-promoting material
does not remain on the bare metal surfaces.
Treat all unpainted metal surfaces with quality
metal protectants like SLIPIT
®
, or Boeshield
®
T-9
(see previous page for offerings from Grizzly).
Figure 32. Gears and adjustment screws.
Gears
Adjustment Screws
(2 of 4)
Roller Gears
Lift the gear guard cover and apply a dab of
white lithium grease to the upper roller gears (see
Figure 32). Rotate the hand crank several times
in both directions to distribute the grease to both
gears, then wipe away any excess and close the
cover.
Roller Bushings
Use an oil can to apply a few drops of light
machine oil to the brass bushings at either end of
the three rollers (see Figure 33). Rotate the hand
crank several times in both directions to distribute
the oil, then wipe away any excess.
Figure 33. Roller bushing.
Roller
Bushings