Filter
Top Products
Model T25688 (Mfg. Since 09/13)
-11-
SECTION 3: OPERATIONS
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
Basic Controls
Use Figures 8–9 and the descriptions below to
become familiar with the basic controls of the slip
roll.
Thickness Adjustment Knob: Raises and low-
ers the bottom roller to adjust for thicknesses of
different workpieces.
Radius Adjustment Knob: Raises and lowers
the rear roller to create smaller and larger radius
bends.
Crank: Turns the rollers, feeding the workpiece
through the machine.
Figure 8. Adjustment knobs.
Figure 9. Removable bushing.
Removable Bushing
Removable Bushing: Slides out allowing the
release of the top roller to facilitate the unloading
of cylindrical workpieces.
This machine and its com-
ponents are heavy. Get lift-
ing help to reduce the risk
of injury.
Damage to your eyes and
hands could result from
using this machine with-
out proper protective gear.
Always wear safety glasses
and leather gloves, when
operating this machine.
Eye injury hazard! Always
wear safety glasses when
using this machine.
Thickness
Adjustment
Knob
Radius
Adjustment
Knob
Crank