Filter
Top Products
For technical questions, please call 1-800-444-3353;
Troubleshooting section at end of manual.
Page 18SKU 55167
WELD SETTINGS CHART
NOTE: The numbers within the spaces
are the approximate wire feed settings
recommended* for this wire size and
material thickness.
Material Thickness (Steel)
16 Gauge 14 Gauge 12 Gauge
1
/
8
”
Wire Size
(Flux Core, Mild Steel)
.030”
Minimum
Current
1
Minimum
Current
4
Minimum
Current
7
Maximum
Current
6
*This chart is only intended to show general guidelines for different wire sizes and for different
thicknesses of material. The settings should only be used at the beginning of a weld and must be
adjusted after stopping and carefully inspecting the weld. Proper welding takes good technique
and practice.