Filter
Top Products
Page 11For technical questions, please call 1-800-444-3353.SKU 67450
Trigger Installation
Note: This tool includes an additional trigger
to allow another triggering option.
The BLACK Trigger enables single-
sequential operation.
This operation is safer and should be
used whenever practical.
The RED Trigger enables contact trip /
bump re operation.
This operation is more dangerous.
Only a skilled operator who is aware
of the hazards and uses proper, safe
work practices should use contact
trip / bump re operation.
WARNING! To prevent serious injury 1.
from accidental ring, disconnect air
supply, point nailer in a safe direction,
and release pressure before changing
trigger.
Rubber
Ring
Pin
TriggerLever
Spring
2. Remove Pin and Rubber Ring from
current Trigger.
Remove current Trigger. Remove Spring 3.
and store unused Trigger in secure dry
place.
Trigger
Spring
4. Place Spring into desired Trigger.
Spring
Trigger
Valve Stem
Lever
5. Hold down Spring and Lever while
placing Trigger over valve stem.
Pin
Rubber
Ring
6. Insert Pin, and place Rubber Ring over
end of Pin.
Check Trigger for proper operation and
7.
test safety operation according to the
instructions that follow.
REV 10g
Full