Filter
Top Products
Page 16 For technical questions, please call 1-800-444-3353. SKU 67450
USER-MAINTENANCE
INSTRUCTIONS
Procedures not specically
explained in this manual must
be performed only by a qualied
technician.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL OPERATION,
BEFORE ANY MAINTENANCE OR
REPAIRS ARE DONE (including
clearing jams):
• Wear ANSI-approved safety
goggles with side shields. Other
people in the work area must also
wear ANSI-approved impact safety
goggles with side shields.
Release the trigger.•
Detach the air supply.•
Attempt to re the Tool into a •
piece of scrap wood to ensure
that it is incapable of ring any
fasteners.
Empty Canister and leave it open •
during service.
TO PREVENT SERIOUS INJURY
FROM TOOL FAILURE: Do not
use damaged equipment. If
abnormal noise, vibration, or
air leaks is detected, have the
problem corrected before further
use.
TO PREVENT EXPLOSION:
Lubricate only with specied
lubricants. Lubricate air inlet
using only pneumatic tool oil.
Lubricate internal mechanism
using only white lithium grease.
Other lubricants may damage the
mechanism and may be highly
ammable, causing an explosion.
Note: These procedures are in addition to
the regular checks and maintenance
explained as part of the regular operation
of the air-operated tool.
Daily - Air Supply Maintenance:
Every day, perform maintenance
on the air supply according to the
component manufacturers’ instructions.
The lubricator’s oil level needs to be
be regularly drained. Performing routine
maintenance on the air supply will allow
will also reduce wear on the tool.
Clearing Jams
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL OPERATION,
BEFORE ANY MAINTENANCE OR
REPAIRS ARE DONE (including
clearing jams):
• Wear ANSI-approved safety
goggles with side shields. Other
people in the work area must also
wear ANSI-approved impact safety
goggles with side shields.
Release the trigger.•
Detach the air supply.•
Attempt to re Tool into piece of •
scrap wood to ensure that it is
incapable of ring any fasteners.
Empty Canister and leave it open •
during service.
Occasionally a nail may become jammed 1.
the tool inoperable.
Remove and discard all jammed/2.
damaged nails from the nailer. Detach
and discard all damaged or improperly
collated nails from the coil. Examine the
nailer for any broken, worn or damaged
parts. If any part appears damaged