Harbor Freight Tools 67847 Air Compressor User Manual


 
Page 15For technical questions, please call 1-800-444-3353.SKU 67847
Draining Moisture from the Tank
The Drain Valve (66) is located under
the Tank (70). It must be accessed
daily to release all trapped air and
moisture from the Tank. This will
eliminate condensation which can
cause tank corrosion.
To empty the air and condensation:
Make sure the Power Lever of the a.
compressor is off.
Place a collection pan under the b.
Drain Valve.
Open the Drain Valve.c.
When all the pressure is released, d.
close the Drain Valve.
Counterclockwise
Drain Valve Open
Clockwise
Drain Valve Closed
Figure 7
Inside Compressor
Compressor Wall
Knob
To open the Drain Valve, turn
the knob on the bottom of the
Compressor counterclockwise.
To close the Drain Valve, turn
the knob on the bottom of the
compressor clockwise until you feel
tension and the knob is down as far
as it can go.
Air Filter Maintenance
Check the Air Filter weekly to see if
it needs replacement. If working in
dirty environments, you may need
to replace the lter more often. To
replace the Air Filter:
Remove the Cover (1).a.
Remove the Air Filter (6).b.
Replace with a new Air Filter.c.
Replace the Cover.d.