Filter
Top Products
Page 4 For technical questions, please call 1-800-444-3353. SKU 67847
matching outlets will reduce risk of
electric shock.
Do not expose the compressor b.
to rain or wet conditions. Water
entering a compressor will increase
the risk of electric shock.
Do not abuse the cord. Never use c.
the cord for pulling or unplugging
the compressor. Keep cord
away from heat, oil, sharp edges
or moving parts. Damaged or
entangled cords increase the risk of
electric shock.
Personal safety3.
Stay alert, watch what you are a.
doing and use common sense
when operating this compressor.
Do not use this compressor while
you are tired or under the inuence
of drugs, alcohol or medication. A
moment of inattention while operating
a compressor may result in serious
personal injury.
Use personal protective b.
equipment. Always wear eye
protection. Safety equipment such
as a dust mask, non-skid safety
shoes, hard hat, or hearing protection
used for appropriate conditions will
reduce personal injuries.
Prevent unintentional starting. c.
Ensure the switch is in the off-
position before connecting to
power source or moving the
compressor.
Only use safety equipment d.
that has been approved by an
appropriate standards agency.
Unapproved safety equipment may
not provide adequate protection. Eye
protection must be ANSI-approved
and breathing protection must be
NIOSH-approved for the specic
hazards in the work area.
Compressor use and care4.
Do not use the compressor if the a.
switch does not turn it on and
off. Any compressor that cannot
be controlled with the switch is
dangerous and must be repaired.
Disconnect the plug from the b.
power source of the compressor
before making any adjustments,
changing accessories, or storing
it. Such preventive safety measures
reduce the risk of starting the
compressor accidentally.
Store an idle compressor out of c.
the reach of children and do not
allow persons unfamiliar with the
compressor or these instructions
to operate it. A compressor is
dangerous in the hands of untrained
users.
Maintain the compressor. Keep d.
the compressor clean for better
and safer performance. Following
instructions for lubricating and
changing accessories. Keep dry,
clean and free from oil and grease.
Check for misalignment or binding
of moving parts, breakage of parts
and any other condition that may
affect the compressor’s operation.
If damaged, have the compressor
repaired before use. Many
accidents are caused by a poorly
maintained compressor.
Use the compressor in accordance e.
with these instructions, taking into
account the working conditions
and the work to be performed. Use
of the compressor for operations
different from those intended could
result in a hazardous situation.