Filter
Top Products
Page 8 For technical questions, please call 1-800-444-3353. SKU 67847
SPECIFICATIONS
Electrical
Requirements
120 V~ / 60 Hz / 2.5 HP
Amperage
14A (Dedicated circuit
recommended)
Motor Speed 3400 RPM
Phase Single
Air Outlet Size 1/4”-18 NPT
Air Pressure
Auto Shut-Off @ 125 PSI
Restart @ 95 PSI
Air Tank Capacity 21 Gallons
Air Flow Capacity
4.7 SCFM @ 90 PSI
5.8 SCFM @ 40 PSI
Oil Capacity 5.6 oz. (165ml)
Oil Type
SAE 30W non-detergent
Air Compressor Oil
(Sold separately)
(SKU 95048)
Decibel Level 90 dB @ 1m
UNPACKING
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon
as possible.
INSTRUCTIONS FOR
PUTTING INTO USE
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn the Power Lever “OFF”
and unplug the Air
Compressor from its electrical
outlet before assembling or
making any adjustments to
the compressor.
Note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
Functions
Figure 1
ON/OFF Power Lever
(On Pressure Switch (54))
Oil Sight
Glass
(33)
Pressure
Regulator
(74)
Safety
Valve
( 73 )
Tank Pressure
Gauge (53)
Output
Pressure
Gauge (77)
Quick
Coupler
(76) - For
attaching
in-line
shutoff
valve, air
hose and
tool
Drain Valve (66)
OFF
ON
ON/OFF
Power
Lever
Tank Pressure
Gauge (53)
Safety
Valve
(73)
Output Pressure
Gauge (77)
Pressure
Regulator
(74)
Quick
Coupler
(76)
Pressure
Switch (54)
(Controls)