Filter
Top Products
SKU 91146 For technical questions, please call 1-800-444-3353. PAGE 2
PRODUCT SPECIFICATIONS
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2. Do not operate welding equipment in explosive atmospheres, such as in
the presence of flammable liquids, gases, or dust. Welding equipment
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
When unpacking, check to make sure all the parts shown on the Parts Lists on pages 26
and 27 are included. If any parts are missing or broken, please call Harbor Freight Tools
at the number shown on the cover of this manual as soon as possible.
Item Description
Electrical Requirements Input Voltage: 220V / 60 Hz / 45 Input Amperage
Power Cord: 10 AWG @ 6’ Long
Power Plug: 220V (not included), Requires 50 Amp Circuit
Duty Cycles 60% @ 250 Amps / 100% @ 195 Amps
Maximum Welding
Thickness Capacity
Up To 3/8” Mild Steel
Welding Current 30 – 250 Amps
Required Wire Sizes .024” To .047” Diameter
Wire Control Settings Internal, Spot & Pause, 4 Time, & 2 Time
Gun Coolant Type Air Cooled
Fuse Type 3 AMP Buss Fuse
Gun Power Cable Length 13’
Ground Clamp Cable Length 13’
Wheels Front: Swivel Castors / 3-1/4” Diameter x 1” Thick
Rear: Rigid / 8” Diameter x 1-1/2” Thick on 7/8” Diameter Axle
Accessories Gas Pressure Regulator w/Flow Meter
Welding Gloves / Face Mask / 1 Torch Liner / 5 Spare Tips
Weight 187 Pounds
UNPACKING
SAVE THIS MANUAL
creates sparks which may ignite the dust or fumes.