HP (Hewlett-Packard) TI1681A Paint Sprayer User Manual


 
Technical Data
309293J 69
Technical Data
Loctite® is a registered trademark of the Loctite Corporation.
Category Data
Maximum Working Fluid Pressure 100 psi (0.7 MPa, 7 bar)
Maximum Working Air Pressure 100 psi (0.7 MPa, 7 bar)
Minimum Air Pressure at Gun Inlet 40 psi (0.28 MPa, 2.8 bar)
Maximum Fluid Operating Temperature 120°F (48°C)
Short Circuit Current Output 125 microamperes
Voltage Output Energy .35 J with fluid hose 246431 installed
244581, 245301: 60 kV
244582, 245305: 30-60 kV
Sound Power (measured per ISO Standard 9216) at 40 psi (0.28 MPa, 2.8 bar): 90.4 dB(A)
at 100 psi (0.7 MPa, 7 bar): 105.4 dB(A)
Sound Pressure (measured 1 m from gun) at 40 psi (0.28 MPa, 2.8 bar): 87 dB(A)
at 100 psi (0.7 MPa, 7 bar): 99 dB(A)
Gun Air Inlet Fitting, left-hand thread 1/4 npsm(m)
Gun Fluid Inlet Fitting custom inlet for Graco waterborne fluid hose
Gun Weight 27.8 oz (788 g)
Gun Length 11.1 in. (28.2 cm)
Isolation Enclosure Air Inlet Fitting 1/4 npt
Isolation Enclosure Fluid Inlet Fitting 3/8 in. OD tube fitting
Isolation Enclosure Weight 125 lb (56.3 kg)
Isolation Enclosure Height 44 in. (1118 mm)
Isolation Enclosure Width 24 in. (610 mm)
Isolation Enclosure Depth 29 in. (737 mm)
Wetted Parts Gun: Stainless Steel; Nylon, Acetal, Ultra-High Molecular
Weight Polyethylene, Fluoroelastomer, PEEK, Tungsten
Wire, Polyethylene
Waterborne Fluid Hose: PTFE
Suction Tube: Polyethylene, Stainless Steel
Triton Pump: See manual 309303