Honeywell 4820 Work Light User Manual


 
7 - 9
Mapping of Printed Bar Codes on page A-7), and scan the value and the Save
bar code from the Programming Chart on the inside the back cover of this man-
ual. The data characters should then appear properly.
Interleaved 2 of 5
< Default All Interleaved 2 of 5 Settings >
Interleaved 2 of 5
Check Digit
No Check Digit indicates that the image scanner reads and transmits bar code
data with or without a check digit.
When Check Digit is set to Validate, but Don’t Transmit, the unit only reads
Interleaved 2 of 5 bar codes printed with a check digit, but will not transmit the
check digit with the scanned data.
Code 39 Code Page
* On
Off