Honeywell 4820 Work Light User Manual


 
4 - 21
No Read
With No Read turned On, the image scanner notifies you if a code cannot be
read. If using a QuickView Scan Data Window, an “NR” appears when a code
cannot be read. If No Read is turned Off, the “NR” will not appear.
Default =
Off.
If you want a different notation than “NR,” for example, “Error,” or “Bad Code,”
you can edit the output message using the Data Formatter (page 6-5). The hex
code for the No Read symbol is 9C.
Print Weight
Print Weight is used to adjust the way the image scanner reads Matrix symbols.
If an image scanner will be seeing consistently heavily printed matrix symbols,
then a print weight of 6 may improve the reading performance. For consistently
light printing, a print weight of 2 may help. After scanning the Set Print Weight
bar code, set the print weight (from 1-7) by scanning digits from the inside back
cover, then scanning Save.
Default = 4
.
On
* Off
Set Print Weight
* Default