Honeywell MX7 Saw User Manual


 
Passive Cradle and RAM Ball and Arm, Assembled
Note: Honeywell does not supply the bolts or washers needed when mounting the cradle assembly to the vehicle chassis.
Use bolts with a maximum 10/32” (0.3125) diameter.
See Also: "Components"
RAM Assembly Components
Mount the cradle U-bracket to the upper RAM ball assembly with the bolts, washers and nuts supplied
by Honeywell.
Qty 4 – Hex Cap 1/4-20 x 3/4 bolts
Qty 4 – 1/4 flat washer
Qty 4 – 1/4-20 nylon insert lock nuts
RAM Assembly Footprint
3-4