Filter
Top Products
Dock MX7 in Cradle
Note: Do not put the MX7 into the vehicle cradle until the cradle is securely fastened to the vehicle.
The MX7 is inserted into the cradle by pressing the base of the MX7 down into the cradle pocket until the connector at the base
of the MX7 clicks into place with the charging connector at the bottom of the docking well. If the cradle is connected to a power
source, the Docked LED illuminates.
Firmly press the MX7 backward until the Retainer snaps forward , its latches catching on the front of the MX7, securing it in the
cradle.
Always put the handle through the Handle Opening first or damage to the scanner aperture may occur.
Do not slam the MX7 into the cradle pocket. Damage to the cradle and MX7 components may occur. If the vehicle cradle or
MX7 is damaged, it must be removed from service and repaired before placing it into service again.
4-21