Honeywell MX7 Saw User Manual


 
Install the Cradle U-Bracket
Note: Honeywell does not supply the bolts or washers needed when mounting the cradle assembly to the vehicle chassis.
Use bolts with a maximum 10/32” (0.3125) diameter.
See Also: "Components"
Attach the U-Bracket to the vehicle, making sure it does not impede
safe operation of the vehicle.
Attach the Passive Cradle to the U-Bracket using the Angle Adjust
knobs.
Use both knobs to loosen and tighten the cradle to the U-bracket
while determining the best viewing angle.
The passive vehicle mounted cradle is ready for use.
Periodically test the mounting device and tighten bolts and/or knob as needed.
If the cradle becomes cracked or warped it must be replaced before the cradle is put back in service.
3-5