Huskee HH4500 Cordless Drill User Manual


 
5
The notice below is included in the shipping carton. It contains information relating to
operator safety. Read and understand this notice before unpacking or operating the
hammer. We suggest you retain this notice and include it in your local safety program.
CAUTION
Never operate the hammer unless the following Safety Instructions have
been read and understood.
Projectiles from the hammer, tool, rock or other broken material may enter
the operator’s area and cause serious or fatal injury. Use personal
protection equipment.
Projectiles from the hammer, tool, rock or other broken material may
cause serious or fatal injury to bystanders. Do not operate the hammer
when bystanders are in the area.
In some cases, the hammer may enter the operator’s area if a bracket or
cylinder breaks. Make sure appropriate shields are used when operating
the hammer with this type of equipment.
Shown above is a copy of a decal that must be installed on a surface of the
hammer that faces the operator and on the carrier operator’s control area.
Never operate the hammer if these decals are missing. Decals must be
inspected periodically to ensure that all wording is legible. Decals should
be replaced if illegible.
Decals can be obtained at no charge from your IPC Distributor or by
contacting IPC’s Customer Service Department.