Filter
Top Products
NOTE: When assembling needle valves (34617), install with
M105
b.
top of needle valve flush with top of valve block (44927).
Assemble valve assembly (45174) to valve housing (44919)
40
with gasket (44948) and nameplate (45184) and secure with
five screws (Y211-109) and washers (Y14-10)
NOTE: When replacing gaskets, torque cap screws to 20 in.
Ibs and re-torque after 24 hours to remove gasket set.
44979 VALVE SLEEVE
/
45174 VALVE ASSEMBLY
PARTS MARKED THUS ARE INCLUDED IN SERVICE KIT NUMBER
45632, SEE PAGE 20.
9