Filter
Top Products
33
NS-55D440NA14 Insignia 55" LED TV
www.insigniaproducts.com
Using analog audio
When you connect a home theater using the AUDIO OUT/ jack, the TV speakers are muted.
To connect a home theater system using analog audio:
1 Make sure that your TV’s power cord is unplugged and the home theater system is turned off.
2 Connect a 3.5mm audio cable (not provided) to the AUDIO OUT/ jack on the side of your TV and to the
AUDIO IN jacks on the analog home theater system.
3 Plug your TV’s power cord into a power outlet, then turn on your TV and the home theater system.
Notes
• For information about selecting the audio out mode for a home theater,
see the Headphone/Audio Out option in “Adjusting sound settings” on
page 44.
• You can connect headphones, an amplifier, a home theater system, or a
sound bar to the AUDIO OUT/ jack. If you want to use headphones,
you need to disconnect the amplifier, home theater system, or sound
bar.
3.5mm audio
cable
Home theater system
Side of TV
3.5mm audio
cable connector
AUDIO/ OUT
jack
On your TV