Filter
Top Products
19
You can test your installation by either running a software program you use
frequently and experiencing the increased performance, or by using the
diagnostics on the diskette included in your Pentium OverDrive processor
package. If you installed the diskette software to view the animated demo
prior to this step, you do not need to reinstall the software at this time. To use
the diagnostics:
For DOS users Go to the odp_util directory and type:
overdriv
e
For Windows NT users Go to the odp_util directory and
type
from a full-screen DOS
prompt:
overdriv
e
For Windows users: Double click the icon “OverDrive
Processor Demo/Diagnostics”
For OS/2, OS/2 WARP users: Ensure that the following line ap-
For more information, pears in your config.sys file:
refer to Troubleshooting VME=NO
section, p. 26.
Ensure that the settings for your DOS
full-screen command prompt in-
cludes the following:
HW_TIMER set to ON
From a full-screen DOS prompt type:
overdriv
e
For Windows 95 users: Press
e
or click OK
When the Main Menu appears, select “Intel OverDrive
Processor Diagnos-
tics.” If the diagnostic utilities program tells you the Pentium OverDrive
processor is not operating correctly or if you do not obtain any performance
increase, see the Troubleshooting section to determine possible problems. If
you cannot troubleshoot the problem, contact your dealer for assistance. If
you require further assistance, see the Getting Help section.
Step 8 - Test the Pentium OverDrive processor
installation.
Your Intel Pentium OverDrive processor installation is com-
plete.