Filter
Top Products
7
5.0 Specifications
Model Stock No.
J-4200A 414551
J-4200A-2 414552
J-4202A 414553
J-4300A 414600
J-4301A 414601
J-4400A 414602
J-4401A 414603
J-4200A Disc/Belt Sander J-4300A Belt Sander J-4400A Disc Sander
Disc/Belt Sander Belt Sander Disc Sander
Table size
Disc:12x16-3/8 in.
(254x416mm)
Belt: 7 3/8x14 3/4 in.
(187x355mm)
7-3/8x14-3/4 in.
(187x355mm)
12x16-3/8 in. (254x416mm)
Table tilt (both) 45° down, 20° up 45° down, 20° up 45° down, 20° up
Miter gauge groove
(both) 3/8x3/4 in.
(9.5x19mm)
3/8x3/4 in. (9.5x19mm) 3/8x3/4 in. (9.5x19mm)
Disc diameter 12 in. (305mm) 12 in. (305mm)
Disc Speed 1960 RPM 1960 RPM
Platen size
6-1/4x14-3/4 in.
(159x375mm)
6-1/4x14-3/4 in.
(159x375mm)
Belt size 6x48 in. (152x1214mm) 6x48 in. (152x1214mm)
Belt speed 2850 SFM 2850 SFM
Dimensions
(depth, W, H)
29x17x42-3/4 in.
(1070x725x4250mm)
Dimensions w/platen
vertical (depth,W, H)
19x16x57-1/2 in.
(475x400x1437mm)
19x16x57-1/2 in.
(475x400x1437mm)
Dimensions w/platen
horizontal
(depth, W, H)
25-1/2x16x43 in.
(637x400x1075mm)
25-1/2x16x43 in.
(637x400x1075mm)
Motor options
Model J-4200A 1 PH 1.5HP
115/220V (prewired 115V)
Model J-4300A 1 PH
1.5HP 115/230V (prewired
115V)
Model J-4400A 1 PH 1.5HP
115/230V (prewired 115V)
Model J-4200A-2 1 PH
1.5HP 220V
Model J-4202A 3 PH 1.5HP
230V/460V (prewired 230V)
Model J-4301A 3 PH 1.5HP
230V/460V (prewired 230V)
Model J-4401A 3 PH 1.5HP
230V/460V (prewired 230V)
Weight 250 lbs. (113 kg.) 211 lbs. (96 kg.) 164 lbs. (74 kg.)
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, Walter Meier (Manufacturing) Inc., reserves the right to change specifications at any time and without
prior notice, without incurring obligations.