Filter
Top Products
8
7.0 Specifications
Model number ........................................................................................................................................ JPM-13CS
Stock Number ............................................................................................................................................. 708524
Capacities:
Maximum Cutting Width ................................................................................................................. 13” (330 mm)
Maximum Thickness .................................................................................................................. 6-1/8” (156 mm)
Full Width Depth of Cut ................................................................................................................................ 1/16”
Minimum Planing Length ............................................................................................................... 14” (356 mm)
Cuts per Minute ........................................................................................................................................ 13,500
Feed Rate, Planing ................................................................................................................................... 20 fpm
Feed Rate, Molding .................................................................................................................................. 10 fpm
Cutterhead:
Number of Knives .............................................................................................................................................. 3
Knife Size .................................................................................................................... 13-1/16”L x 1/8”W x 5/8”H
Cutterhead Diameter ................................................................................................................................ 2-9/16”
Cutterhead Speed (RPM) ............................................................................................................................ 4500
Motor and controls:
Motor type ......................................................................... totally enclosed fan cooled, induction, capacitor start
Horsepower ........................................................................................................................................... 1-1/2 HP
Phase .......................................................................................................................................................... single
Voltage ....................................................................................................................... 115/230V (prewired 115V)
Cycle ............................................................................................................................................................ 60H z
Listed FLA (full load amps) ..................................................................................................................... 15/7.5 A
RPM ............................................................................................................................................................. 3450
Start capacitor ......................................................................................................................... 400MFD, 125VAC
Power transfer ............................................................................................................................................ v-belt
On/off switch ..................................................................................................................................... push button
Motor speed ........................................................................................................................................ 3450 RPM
Power plug installed ..................................................................................................................................... 120V
Recommended circuit and fuse/breaker size
1
.......................................................... 30A (115V), or 15A (230V)
1
subject to local/national electrical codes.
Dust collection:
Dust port outside diameter ................................................................................................................ 4” (100mm)
Minimum extraction volume required .................................................................................... 350 CFM (18CMM)
Dimensions and weights:
Overall Dimensions ........................................................................................ 23-31/32”W x 36-1/2”D x 43-1/2”H
Net Weight (approx.) .................................................................................................................... 225 lb (102 kg)
Shipping Weight (approx.) ........................................................................................................... 262 lb (119 kg)
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring
obligations.
IMPORTANT:
∗ The use of a dust chute and adequate dust collection system is highly recommended but not
required for most planing operations.
∗ The use of a dust chute and adequate dust collection system is required for all molding operations.
For a complete line of woodworking dust collectors, contact your local JET distributor, or visit our website at
www.jettools.com.