Filter
Top Products
13
Dust Collection
1. Hook the sander to a dust collector using a
4” diameter hose and clamp (A, Fig. 16).
JET offers a wide variety of hoses, adapters
and dust collectors.
2. Loosen the wing nut (B, Fig. 16) and pull the
gate (C, Fig. 16) open to allow air suction to
the sanding belt. Push the gate closed to
shut off air suction. Tighten the wing nut.
3. Push the gate (D, Fig. 16) down to shut off
air suction to the disc. Lift the gate to open
theairsuctiontothedisc.
Lubrication
All moving parts run on sealed ball bearings and
require no lubrication.
Optional Accessories
Open Stand w/Belt Rack 708596
Closed Stand w/Belt Rack708597
JET Stik Abrasive Belt and Disc Cleaner 57620025
Dust Collectors and Accessories see JET Distributor
JSG-96 Sanding Belts, Master Carton 10
6”x48” 24 Grit 40 Grit 60 Grit 80 Grit 100 Grit 120 Grit 150 Grit 180 Grit
Close
dCoat
57617110 57617210 57617410 57617510 57617610 57617710 57512210 57512310
Open
Coat
57432910 57422110 57422210 57422310 57422410 57422510 57422610 57422710
JSG-96 Sanding Disc PSA Aluminum Oxide Cloth Back Sanding Disc, Master Carton 25
9” 36 Grit 50 Grit 60 Grit 80 Grit 100 Grit 120 Grit
Close
dCoat
57697525 57697650 57697750 57697850 57697950 57698050