Filter
Top Products
[edit interfaces eth0]
user@host# set unit 0 family inet broadcast 192.2.0.255
4. Verify the interface configuration.
[edit interfaces eth0]
user@host# show
unit 0 {
family {
inet {
broadcast 192.2.0.255;
}
}
}
Configuring the System to Accept SSH and Telnet Connections
You can enable SSH and Telnet to let users who have the appropriate privileges
connect to the system. For security reasons, we recommend that you do not allow
remote users to access the CLI as root. The system does not allow root access over
a Telnet connection. For more information, see SRC–PE Getting Starting Guide, Chapter
7, Configuring Remote Access to a C–series Platform.
To configure the system to accept SSH connections:
1.
From configuration mode, access the [edit system services ssh] hierarchy level.
2. (Optional) Specify whether or not to allow root login through SSH.
[edit system services ssh]
user@host> set root-login (allow | deny | deny-password)
where:
■
allow— Allow users to log in to the C-series platform as root through SSH.
■
deny— Disable users from logging in to the system as root through SSH.
■
deny-password— Allow users to log in to the system as root through SSH
when the authentication method (for example, RSA authentication) does not
require a password. (Default)
Configuring the System to Accept SSH and Telnet Connections ■ 25
Chapter 5: Setting the Initial Configuration