Filter
Top Products
Controller Tasks
TaskId Function Done% Container State Specific1 Specific2
------ -------- ------- --------- ----- --------- ---------
No tasks currently running on the controller
Table 8: show disk status Output Fields
Field DescriptionField Name
C indicates the channel number, ID the device ID, and L the device logical numberC:ID:L
Type of device; diskDevice Type
Number of blocks available on the diskBlocks
Number of bytes for each blockBytes/Block
Status of disk:
■
Detached—Not available for use
■
Initialized—Prepared for use with arrays
■
Not initialized—Not prepared for use with arrays
■
Offline—Present at system boot, but the disk was removed or failed
■
Unowned—The controller does not control the disk
Usage
Whether or not the disk is on a shared channelShared
Disk speed in megabytes per secondRate
Whether or not the device is enabled for Specifies if Self-Monitoring, Analysis and
Reporting Technology (SMART)
Smart Capable Device
List of MIE exceptionsMethods of Informational Exceptions
(MIE)
Whether or not SMART exception reporting is enabledEnable Exception Control
Whether or not performance is enabledPerformance Enabled
Number of errors that SMART found on the diskError Count
The No tasks currently running on controller message indicates that no tasks are
running, including initialization.
Controller Tasks
42 ■ Managing Disks in a C-series Platform
C2000 and C4000 1.0.x Hardware Guide