Filter
Top Products
Controller Tasks
TaskId Function Done% Container State Specific1 Specific2
------ -------- ------- --------- ----- --------- ---------
100 Rebuild 0.3% 0 RUN 00000000 00000000
Reinitializing an Active Disk
You can reinitialize a disk that is already active in a C-series platform.
To reinitialize a disk:
■ Initialize the disk.
user@host> request disk initialize device 0 | 1 force
The command generates data on the disk that enables the disk controller to
manage the disk. The disk controller copies data from the other disk and
establishes mirroring between the two disks.
Viewing Information About Disks on a C-series Platform
To view information about disks in the C-series platform:
■ Enter the show disk status command.
user@host> show disk status
C:ID:L Device Type Blocks Bytes/Block Usage Shared Rate
------ -------------- --------- ----------- ---------------- ------ ----
0:00:0 Disk 145226112 512 Initialized NO 150
0:01:0 Disk 145226112 512 Initialized NO 150
Smart Method of Enable
Capable Informational Exception Performance Error
C:ID:L Device Exceptions(MRIE) Control Enabled Count
------ ------- ---------------- --------- ----------- ------
0:00:0 Y 6 Y N 0
0:01:0 Y 6 Y N 0
Managing Disks in a C-series Platform ■ 41
Chapter 8: Managing RAID Disks on a C-series Platform