Filter
Top Products
To configure the system to accept Telnet connections:
■ In edit mode, type the following command.
[edit]
user@host# set system services telnet
Adding an Admin User Account
Although root access is used for initial configuration of the system, user accounts are
used to enter commands and statements at the CLI. Therefore, you must set up an
admin account to allow further configuration. You can use a built-in class, such as
super-user.
To configure an account for an administrative user:
1. Create an account for an administrative user.
[edit]
user@host # edit system login user user
For example:
[edit]
user@host # edit system login user myadmin
2. Set the class for the administrative user to the login class that you created.
[edit system login user myadmin]
user@host # set class class
For example:
[edit system login user myadmin]
user@host # set class super-user
3. Specify the name of the administrative user.
[edit system login user myadmin]
user@host # set full-name “John Doe”
4. Set the CLI editing level to expert.
[edit system login user myadmin]
user@host# set level expert
5. (Optional) Specify that a space be used for command completion.
[edit system login user myadmin]
user@host # set complete-on-space on
6. Verify that the configuration for the administrative user is correct.
[edit system login user myadmin]
26 ■ Adding an Admin User Account
C2000 and C4000 1.0.x Hardware Guide