Juniper Networks C4000 Biscuit Joiner User Manual


 
Route cables so that modules and field-replaceable units are easily accessible.
Route cables in a logical direction to prevent loss of connectivity to other
equipment in the rack, to associated equipment in adjacent racks, or to the
backbone network.
For additional cable recommendations, consult the document GR-63CORE: Network
Equipment Building System (NEBS) Requirements: Physical Protection, Issue 2, April
2002.
Product Reclamation and Recycling Program
Juniper Networks is committed to environmentally responsible behavior. As part of
this commitment, we continually work to comply with environmental standards such
as the European Unions Waste Electrical and Electronic Equipment (WEEE) Directive
and Restriction of Hazardous Substances (RoHS) Directive.
These directives and other similar regulations from countries outside the European
Union regulate electronic waste management and the reduction or elimination of
specific hazardous materials in electronic products. The WEEE Directive requires
electrical and electronics manufacturers to provide mechanisms for the recycling
and reuse of their products. The RoHS Directive restricts the use of certain substances
that are commonly found in electronic products today. Restricted substances include
heavy metals, including lead, and polybrominated materials. The RoHS Directive,
with some exemptions, applies to all electrical and electronic equipment.
In accordance with Article 11(2) of Directive 2002/96/EC (WEEE), products put on
the market after 13 August 2005 are marked with the following symbol or include
it in their documentation: a crossed-out wheeled waste bin with a bar beneath.
Juniper Networks provides recycling support for our equipment worldwide to comply
with the WEEE Directive. For recycling information, go to
http://www.juniper.net/environmental, and indicate the type of Juniper Networks
equipment that you wish to dispose of and the country where it is currently located,
or contact your Juniper Networks account representative.
Products returned through our reclamation process are recycled, recovered, or
disposed of in a responsible manner. Our packaging is designed to be recycled and
should be handled in accordance with your local recycling policies.
48 Product Reclamation and Recycling Program
C2000 and C4000 1.0.x Hardware Guide