Filter
Top Products
INSERTING LASER BATTERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
SECTION FOUR
MAINTENANCE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
TROUBLE SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS . . . . . . . . . . . . . . 34
SECTION FIVE
2 YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-38
CONGRATULATIONS!
Thanks for choosing this product. At Alltrade, our aim is to provide you with quality
products at an affordable price, and we want you to be totally satisfied with your
product and our Customer Service. If any help and advice is needed, please
contact us at 1-800-590-3723. Properly cared for, this product will give you many
years of satisfaction.
INTENDED USE
This product is intended for consumer use only. This tool is not designed for pro-
fessional use. The power cord should only be used in approved electrical outlets as
described in this manual. Failure to use the proper power cords and/or extension
cords may result in fire or possible damage to the bench grinder.
RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to
follow all instructions in this manual may result severe personal injury or death.
Keep this manual and refer to it for Safety Instructions, Operating Procedures
and Warranty.
The safety instructions provided in this manual are not intended to cover all possible
conditions and practices that may occur when operating, maintaining and cleaning
power equipment.
Always use common sense and pay particular attention to all the DANGER,
WARNING, CAUTION and NOTE statements of this manual.
This is the safety alert symbol. It is used to alert
you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid
possible injury or death.
TABLE OF CONTENTS
CONGRATULATIONS! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
INTENDED USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
SECTION ONE
RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS . . . . . . . . . . . . 2-3
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
SECTION TWO
GENERAL SAFETY RULES – FOR ALL ELECTRIC POWER TOOLS . . . . 4-5
GROUNDING INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
EXTENSION CORD USAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
IMPORTANT SAFETY RULES FOR DRILL PRESSES . . . . . . . . . . . . . . . 7-10
SYMBOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
SECTION THREE
FUNCTIONAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-21
COLUMN AND TABLE HARDWARE ASSEMBLY . . . . . . . . . . . . . . . 13-14
INSTALLING THE TABLE ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . 15
INSTALLING THE HEAD ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . 15-16
INSTALLING BELT GUARD KNOB . . . . . . . . . . . . . . . . . . . . . . . . . . 16
INSTALLING THE CENTER PULLEY . . . . . . . . . . . . . . . . . . . . . . . . 16
ADJUSTING THE DRIVE PULLEYS . . . . . . . . . . . . . . . . . . . . . . . . . 17
INSTALLING THE DRIVE BELTS . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-18
INSTALLING THE FEED HANDLES . . . . . . . . . . . . . . . . . . . . . . . . . 18
INSTALLING THE DRILL CHUCK . . . . . . . . . . . . . . . . . . . . . . . . . . 19
SQUARING THE WORKTABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-21
OPERATING INSTRUCTIONS FOR THE DRILL PRESS . . . . . . . . . . . . . 21-28
INSERTING THE DRILL BIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-23
ADJUSTING THE TABLE HEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . 24
ADJUSTING THE TABLE TILT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-25
ROTATING THE WORKTABLE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
ADJUSTING THE DRILL PRESS SPINDLE SPEED . . . . . . . . . . . . . 25
SETTING THE DRILLING DEPTH ADJUSTMENT . . . . . . . . . . . . . . 26
ADJUSTING THE SPINDLE RETURN SPRING . . . . . . . . . . . . . . . . 26-27
USING THE DRILL PRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
DRILLING WOOD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-28
DRILLING METAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-29
OPERATING THE LASER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
LASER SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-30
1 2