Filter
Top Products
C-1
ACCESSORIES
C-1
GENERAL OPTIONS /
ACCESSORIES
The following options/accessories are available for
your Ranger 275:
K886-1 Canvas Cover - To protect the Ranger 275
when it is not being operated. Made from attractive
red canvas material that is flame retardant, mildew
resistant and water repellent.
K889-2 Two Wheel Undercarriage - For moving by
hand. Two 4.00" x 8" pneumatic tires. Overall width
29" (.74m).
K893-1 Caster for K889-2 Undercarriage - Mounts
to the front of the Two-Wheel undercarriage to allow
easy movement on smooth surfaces. Includes a 6"
diameter hard rubber wheel with a convenient toe-on,
toe-off locking brake.
K933-1 Four Wheel Undercarriage - Allows move-
ment of the Ranger 275 by hand without lifting on
smooth surfaces. Includes two rugged, hard molded
wheels and two durable pneumatic tires. The spring
loaded handle provides convenient, comfortable steer-
ing. The K934-1 Bracket is available for mounting a
gas cylinder on the undercarriage.
K934-1 Bracket for Mounting a Gas Cylinder to a
K933-1 Undercarriage - Easily mounts on the back of
the K933-1 Four Wheel Undercarriage to carry a weld-
ing gas cylinder.
K957-1 Two-Wheeled Trailer - For in-plant or yard
towing of the Ranger 275. Suitable for road towing
with optional Fender and Light Kit. The following
options are available for the K957-1 Two-Wheeled
Trailer:
K958-1 - Ball Coupler 2"
K958-2 - Lunette Eye Coupler
K959-2 - Fender & Light
K965-1 - Cable Rack
K894-1 Spark Arrester Kit - A field installed kit for
the Ranger 275 engine muffler exhaust pipe. Includes
a heavy-gauge steel, approved spark arrester, mount-
ing clamp and adapter.
K703 Accessory Kit - Includes the following:
- Thirty-five feet (10.5 meters) of # 1/0 AWG elec-
trode cable.
- Thirty feet (9.1 meters) of # 1/0 AWG work cable.
- Headshield with No. 12 filter.
- GC500 work clamp.
- Cooltong® 300 insulated electrode holder.
K802-R Power Plug Kit - Provides four 15 amp, 120
volt plugs and one 50 amp, dual voltage 120/240V, full
kVA plug.
K857 Remote Control - Includes a control box with
25 feet (7.5 meters) of 4-conductor cable. Allows out-
put voltage to be controlled remotely.
K857-1 Remote Control - Includes a control box with
100 feet (30.5 meters) of 4-conductor cable. Allows
output voltage to be controlled remotely.
K896-1 GFCI Receptacle Kit - Includes two UL
approved 120 volt ground fault circuit interrupter
receptacles (duplex type) with covers and installation
instructions. Each receptacle is rated 15 amps, but
the maximum total current from each GFCI duplex is
limited to 20 amps. The GFCI receptacles replace the
two factory installed 120 volt duplex receptacles.
TIG WELDING OPTIONS /
ACCESSORIES
K930-2 TIG Module - The TIG Module is an accesso-
ry that provides high frequency and shielding gas con-
trol for AC and DC GTAW (TIG) welding applications.
It provides contactor control of constant current weld-
ing power sources having an internal contactor. The
TIG Module is supplied without accessories, Arc Start
switches, Amptrols, cables, torches and mounting
brackets must be purchased separately.
K939-1 Docking Kit - For mounting the K930-1 TIG
Module on top of the Ranger 275.
K936-1 Control Cable - Control cable for connecting
the K930-2 TIG Module to a Ranger 275.
K814 Arc Start Switch - A remote start switch used
in conjunction with the K930-2 TIG Module to energize
the Ranger 275 output terminals via the TIG module.
K963 Hand Amptrol - Remote output control and
contactor control.
K870 Foot Amptrol - Remote output control and con-
tactor control.
RANGER 275