Filter
Top Products
A-1
INSTALLATION
RANGER 275
A-1
TECHNICAL SPECIFICATIONS - Ranger 275 Kohler Engine (K1641-1)
Make/Model Description Speed (RPM) Displacement Starting Capacities
System
Kohler 2 cylinder High Idle 3700
38 cu. in(624 cc)
12VDC battery
Fuel: 9.0 gal.
20.0 HP @ Low Idle 2400 (Group 58, 435 (34 L)
CH20 3600 RPM Full Load 3400 cold crank amps)
Full Load Bore x Stroke
Gas Engine
3.03” x 2.64” 25 A. Alternator
(77 mm x 67 mm)
Oil: 2.0 Qts.
(
1.9 L)
INPUT - ENGINE
RATED OUTPUT - WELDER
HEIGHT WIDTH DEPTH WEIGHT
30.3 in. 19.1 in. 42.0 in. 469 lbs.
770 mm 485 mm 1067 mm 212 kg.
OUTPUT - GENERATOR
Welding Output Volts at Rated Amps Duty Cycle
1
Max. OCV @ 3700 RPM
CC Stick/TIG, Pipe and CV Wire Welding
275 Amps 28 volts 100%
80 volts DC
300 Amps 25 volts 60%
Auxiliary Power
2
9,000 Watts, 60 Hz
120/240 Volts
100 % Duty Cycle
115/42 Volt Auxiliary Power for Wire Feeders
PHYSICAL DIMENSIONS
1. Duty cycle is based on a 10 minute period. This machine can be loaded to 300 amps for 6 minutes out of every 10 minute
period.
2. Output rating in watts is equivalent to volt-amperes at unity power factor. Output voltage is within ± 10% at all loads up to
rated capacity. When welding, available auxiliary power will be reduced.