Filter
Top Products
C-1 C-1
ACCESSORIES
DRIVE ROLL KITS
Refer to Table C.1 for various drive roll kits that are
available for the POWER MIG
®
256.The item in Bold
is supplied standard with the POWER MIG
®
256.
TABLE C.1
K2378-1 Canvas Cover
K468 Spindle Adapter - for 8” (203.2mm) O.D. spool.
K363P READI-REEL™ ADAPTER
The K363P Readi-Reel Adapter mounts to the 2"
spindle. It is needed to mount the 22-30 lb. Readi-
Reels.
DUAL CYLINDER MOUNTING KIT
(K1702-1)
Permits stable side-by-side mounting of two full size
228.6mm dia x 1.524m high(9" dia. x 5' high) gas
cylinders with “no lift” loading. Simple installation and
easy instructions provided. Includes upper and lower
cylinder supports, wheel axles and mounting hard-
ware.
Wire Wire Size Drive Roll Kit
.023”-.030” (0.6-0.8 mm)
KP1696-030S
.035” (0.9 mm) KP1696-035S
Solid
.045” (1.1 mm) KP1696-045S
Steel
.035”-.045” (0.9-1.1mm) KP1696-1
.040” (1.0mm) KP1696-2
Cored
.035” (0.9 mm) KP1697-035C
.045” (1.1 mm) KP1697-045C
Aluminum
3/64” (1.2 mm) KP1695-3/64A
.035” (0.9 mm) KP1695-035A
POWER MIG
®
256
ALTERNATIVE MAGNUM GMAW
GUN AND CABLE ASSEMBLIES
The following Magnum
®
PRO 250L gun and cable
assembly is separately available for use with the
POWER MIG
®
256. Each is rated 200 amps 60% duty
cycle (or 250 amps 40% duty) and is equipped with the
integrated connector, twist-lock trigger connector, fixed
nozzle and insulator, and includes a liner, diffuser, and
contact tips for the wire sizes specified:
1
Optional liners for different wire diameters are sold
separately, see table D.1 Maintenance Section.
MAGNUM GUN CONNECTION KIT
(Optional K466-6)
Using the optional K466-6 Magnum Connection kit for
the POWER MIG permits use of standard Magnum
200, 300 or 400 gun and cable assemblies.
SPOOL GUN
Remove all input power to the POWER MIG
®
256
before proceeding.
--------------------------------------------------------------------------------
The POWER MIG
®
256 provides direct connection and
use of the Spool Gun (with remote speed control).
It also provides gun trigger switch transfer between the
machineʼs use with its feeder gun or the spool gun for
same polarity welding with different wire and gas
processes.
K2490-1 Magnum
®
250LX
K487-25 Magnum
®
SG Spool Gun (requires
K2445-1 Cable Adapter)
K2445-1 Magnum SG Spool gun Control Cable
Adapter. Allows the K487-25 Magnum SG spool gunʼs
6-pin control cable plug to connect to the POWER
MIG
®
256ʼs 7-pin spool gun control cable receptacle.
English Wire Metric Wire
Length Part No. Size
1
Size
15' (4.6 m) K3081-2 .035 – .045" 0.9 – 1.2 mm