Filter
Top Products
A-1
A-1
INSTALLATION
Input Ampere
Input Voltage Fuse or Breaker Rating On
Frequency (Hz) Size (Super Lag) Nameplate
208/60 60 56A 8
230/60 60 52A 10
230/60 60 47A 10
460/60 30 24A 14
575/60 25 19A 14
TECHNICAL SPECIFICATIONS – POWER MIG
®
256
INPUT – SINGLE PHASE ONLY
RATED OUTPUT
OUTPUT
RECOMMENDED INPUT WIRE AND FUSE SIZES
Height Width Depth Weight
With Coil Claw™ Without Coil Claw™
220 lbs
32.56 in. 20.12 in. 19.15 in. 39.9in. 100 kg.
827 mm 512 mm 487 mm 1014 mm
PHYSICAL DIMENSIONS
Wire Speed 50 – 700 IPM (1.27 – 17.8 m/minute)
WIRE SPEED RANGE
Standard Voltage/Phase/Frequency
Input Current @ 200 Amp Rated Output Input Current @ 250 Amp Rated Output
208/230/1/60 Hz *47/44 Amps *56/52 Amps
230/460/575/1/60 Hz 41/20/16 Amps 47/24/19 Amps
Duty Cycle Amps Volts at Rated Amperes
40% 250 Amps 26 Volts
60% 200 Amps 28 Volts
100% 145 Amps 26 Volts
Welding Current Range (Continuous) Maximum Open Circuit Voltage Welding Voltage Range
30 – 300 Amps 40 Volts 10-28 Volts
POWER MIG
®
256
TEMPERATURE RANGES
STORAGE TEMPERATURE RANGE
-40°F to 185°F(-40°C to +85°C)
OPERATING TEMPERATURE RANGE
-4°F to 104°F(-20°C to +40°C)
* With 115V receptacle loaded to 15A.
Type S, SO, ST, STO or extra
hard usage input cord
AWG (IEC) Sizes