Filter
Top Products
1
PRODUCT DESCRIPTION
WELDING ARMS
1
PRODUCT SUMMARY
General Physical Description
The Lincoln Welding Arms create an organized work
environment. The models available are:
• 6000 series Stanchion Mount for bolting to an
appropriately prepared floor.
All welding arms are constructed with strong steel tub-
ing. The design is light weight yet stiff, and provides
for clever cable routing. When using optional vacuum
equipment, the tubes provide a sleek path for fume
and dust extraction.
For further flexibility, an optional lift truck platform is
available, making it easy to transport the welding arm
about the work site.
Order the optional mini-console for compressed air,
electric and vacuum connections at the wire feeder.
General Functional Description
The welding arms suspend the wire feeder and weld-
ing cables above the floor, allowing the work area to
be fully devoted to fabrication. Control cables, elec-
trode liners, electrode cables, shielding gas hoses,
etc. are neatly routed through the tubing of the arm for
protection.
6000 series arms feature counterbalance springs to
equalize the weight of the feeder and to allow the
operator to choose the working height. The operator
simply glides the arm into position and begins to weld.
RECOMMENDED PROCESSES AND
EQUIPMENT
RECOMMENDED PROCESSES
• GMAW (including GMAW-P, GMAW-STT if sup-
ported by the power source and wire feeder.)
• FCAW
PROCESS LIMITATIONS
• The arms are not suitable for SAW because of the
weight of a typical SAW system.
RECOMMENDED EQUIPMENT
The welding arms are compatible with the following
wire feeders:
• Power Feed 10 and Power Feed 10M
• Power Feed 10 Dual and Power Feed 10M Dual
• LN-10
• DH-10
• LF-72
EQUIPMENT LIMITATIONS
• The total weight of all equipment, guns and cables
mounted to or hanging from the welding arm must
not exceed 150 lb. (68kg).
• When using the optional K1779-1 platform, a mini-
mum weight of 300lb (136kg) must be secured to
the platform to prevent tipping.