Filter
Top Products
ACCESSORIES
CAUTION
:
These accessories or attachments
are
recommended for
use
with your Makita
tool
specified in this
manual. The use of any other accessories or attachments might present
a
risk
of
injury
to
persons.
The
accessories or attachments should
be
used only in
the
proper and intended manner
.TABLE
SAW
STAND
(Part
No.
122251-6)
Set
the stays below and assemble the
legs
inside. Secure with cup square neck bolts
and nuts. Then attach rubber caps to
back
of
legs.
NOW
set
the saw on top of the assembled
stand and secure with
4
hex bolts, flat
washers and hex nuts.
Always secure stand with screws to the
floor or surface.
Use
3/8"
screws to secure (same proce-
dure
as
indicated on p.
8).
CAUTION:
This
is
a
special stand built precisely for this Makita table saw.
Do
not
attach or
set
on other types.
19