Filter
Top Products
To
install the dado head
set,
proceed
as
follows:
1
Turn the tool off and unplug
it
before installing.
2
Remove the blade guard with the spreader.
3
Install the dado head
set
with the teeth pointing down
at
the front
of
the table.
,4
Use the chart below to select the proper cutters to obtain the various cutting widths.
I
I
1
1
I
I I
CAUTION
:
The outer flange or the dado outer flange must be used for each cut width.
The hex nut alone must not be used to secure the dado on to the spindle.
23