Filter
Top Products
FOR
BEVEL CUTS
Raise
the lock lever for
bevel
cuts to
release
it,
then swing the blade with the
elevating knob until
it
reaches the desired
angle from zero to
45
degrees. The bevel
is
indicated by the arrow pointer. After the
desired angle setting
is
reached, then lock
the lock lever by pressing down firmly to
secure in place.
WARNING: The lock lever must be
se-
cured very firmly or opera-
tion can be very dangerous.
STOPPER ADJUSTMENT
Loosen
the
stopper hex socket head bolt
and align the arrow pointer to zero and
45
degrees. Then slide the stopper and secure
the stopper in place carefully with the hex
socket
head
bolt.
RIP FENCE ADJUSTMENT
Adjust the rip fence whenever
it
moves
only with difficulty, sticks, or
is
too loose.
Leave the ruler-attaching hex bolt and
underplate hex bolt in the semi-secured
condition. Then install the rip fence on
table and secure lock knob when the rip
fence
is
parallel with the blade. Now secure
the ruler-attaching hex bolt carefully.
9