Filter
Top Products
1/8"
1/16"
1/8"
1
/a
Dado head
set
(Part
No.
191543-4)
A
dado
is
cutting
a
rabbet or
a
wide groove
into the workpiece. The dado head
set
con-
sists
of
two outside cutters, three inside
cutters and paper washers.
Outside cutters
:
6" diameter, 118" thick, 518" arbor hole, 2 pcs.
Inside cutters
:
6"
diameter, 118" thick, 5/8" arbor hole, 2 pcs.
Inside cutter
Paper washers
:
518" arbor hole, 6 pcs.
:
6" diameter, 1/16" thick, 5/8" arbor hole, 1 pc.
Various combinations of these cutters are used to cut grooves from 118" to 1/2" for use
in making joints, tenoning, grooving,
etc.
Dado outer flange
(Part
No.
224263-6)
When cutting groove 5/16", 3/8". 7/16"
or
1/2", use this dado outer flange.
I
I
Table insert
(Part
No.
342787-1)
When cutting grooves 1/4", 5/16", 318".
7/16", 112" use this table insert instead
of
the standard table insert.
22