Filter
Top Products
i) When the width of rip
is
150
mm
(6")
and wider, carefully use your right
hand to feed the workpiece. Use your
left hand to hold the workpiece in
position against the rip fence.
ii)
When the width
of
rip
is
65
mm
-
150
mm
(2-1/2"
-
6")
wide, use the
push stick to feed the workpiece.
iii)
When the width of rip
is
narrower than
65
mm
(2-1/2"),
the push stick cannot
be used because the push stick will
strike the balde guard. Use the auxi-
liary fence and push block. Attach the
auxiliary fence to the rip fence with
two
"C"
clamps.
I
22