Filter
Top Products
@
Use the chart below to select the proper cutters to obtain the various cutting widths.
114"
I I
5116"
7/16"
112"
0
9/16"
518"
11116"
314"
1311 6"
0
Flange Ring
I
I
I
-*
10x2
I
I
-I
Outslde
,',~~~e
cutter
cutter
I
I
I
+
ox3
0
10x4
t-
o
0
0 0 0
CAUTION
:
For
a
1/8"
cut width, the outside cutter
is
assembled to the spindle in the same manner
The outer flange must be used for each cut width.
The hex nut alone must not be used to secure the dado on to the spindle.
as
the saw blade.
NOTE
:
When widths slightly greater than the above are required, fit the paper washers in between
the inside and outside cutters to adjust the width.
@
Arrange the cutters
so
that the tips
of
the inside cutters are positioned
at
the
gullets
of
the outside cutter.
When more than one inside cutter
is
used, space the tips
of
the inside cutters
equidistantly in relation to one another.
Poorly spaced cutters may cause vibra-
tion and noise.
26